Detailed oil filter pressure solution

Author： Source：本站 Datetime：2012/2/28 13:55:47 hit：2017

1, the oil filter at startup should be careful not to pump reversal in order to avoid the oil pump shaft seal blow lead to inhalation of air.
, Oil filter during use, the pump may be inhaled air, the influence of pump flow, should be checked in order to achieve the rated flow of the oil filter as well as to ensure the normal work of the fine filter, oil filter tube is plugged.
3, the oil filter used for some time, as a result of The pollutants severe clogging of the coarse filter surface leaving the oil-absorbing poor (into the oil), causing the pump noise into the oil filter cleaning or replacement of the filter should be down to remove the.
4, the fine filter in use for some time, susceptible to pollutants gradually blocked, causing the cartridge pressure when the pressure gauge the value of 0.4MPa, the need for timely replacement of the fine filter.
5, in order to ensure the oil filter effect using the oil-absorbing, oil hose should always be kept clean.
6, if the oil filter can not be into the oil, the inspection finds that:
a pump rotation is correct;
between the various parts of the b, the fuel tank to the suction seal is reliable, and leave the oil level or oil suction port for sucking out or into the tubing to suck the sides of casks;
c strainer filter is seriously clogged.
d, the oil pump shaft seal is damaged.
7, oil filter out traffic significantly reduced, the inspection finds that:
a thick, fine filter element is clogged serious;
b, the oil pump shaft oil seal for wear or prolonged reversal caused by blowing.
8, filter sudden drop in pressure, check the fine filter is the breakdown of damage.

Previous：Nothing

Next：Oil filter to filter out the pure oil